| Certification: | RoHS, CE, ISO9001, SGS |
|---|---|
| Condition: | New |
| Maximum Lifting Weight: | 50-100t |
| Maximum Lifting Height: | 15-20m |
| Operation Form: | Remote Control |
| Type: | Common Gantry Crane |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Overhead bridge crane is a simple piece of machinery used for lifting and moving heavy loads from one location to another. It is mainly composed of main beam, end beams, hoisting mechanism, crane travelling mechanism, control system and electrical equipment. Different components can be engineered to improve the crane capacity and performance.
Bridge - it is the unit incorporating one or two main beams and end beams. It is a load-bearing member of the crane and spans the width of the building.
Hoist - it is used to raise and lower the load using wire rope or chain. It is generally powered with electricity.
Trolley - it is the unit onto which the hoist is mounted.
Crane travelling mechanism - the crane can run on the top of the runway beam or on the bottom flange of the beam.
Lifting attachment - the lifted load can be supported using a hook which is connected to the hoist. To handle different types of materials, we offer grab bucket, electromagnetic chuck, carries beam and so on.
Controls - the crane controls are available with pendant control, wireless remote control and cabin control.
Electrical equipment - insulated conductor bars or festoon systems bring the power to the crane.
Since the overhead crane parts and components greatly affect its performance and durability, it is indeed important to select a crane with the right configurations and features.
Top running crane is the most commonly used overhead crane system in workshops, warehouses, workstations and storage yards. As the name implies, it is mounted on top of the runway beam, thus it delivers greater strength, higher efficiency and greater durability than an underhung overhead crane.
The underslung crane travels at the bottom flange of the runway beam which is suspended from the ceiling height of your facility. This form of crane is ideal for occasions where the building height is not sufficient. In addition, it can save the steel structure construction.
The selection of 10 ton overhead crane is largely determined by your applications, operating conditions, working environments and required duty cycle. To receive a proper crane solution, contact us now and discuss your 10 ton overhead crane specification with one of our experts.
10 ton overhead crane is a popular and cost-effective lifting equipment used in a variety of fields and sectors, such as manufacturing, mining, chemical industry and steel mills. The overhead crane 10 ton comes in four main configurations, including single girder, double girder, top running and underhung system, the single girder 10 ton crane is available with a number of different models and sizes to suit varied needs of customers. Our overhead cranes can also be custom designed and constructed to suit your special lifting requirements. And with such below fetures:1 .Overhead crane with hook is mainly in inside workshop. It is divided into two working
classes:A5 and A6 according to the use grade and load-up condition.
2.Safe slide wire or angel iron can be used for electric conduction of crane ;
3.There are three kinds of method for entering the platform of cab from the side ;
4.The cab can be either fixed at the left end and or at the right end;
5. It is used for lifting 5t-32t stuff and the max span reaches 23meters:
6.It has beautiful box-type welded main girders:
7.It has compact structure, light weight and high lifting height
8.It's widely used in workshops,metallurgy,warehouses, assembly shops and etc.
| Type | Brdige/overhead double girder/beam crane |
| Capacity | 5t-450t or customized |
| Span | 10.5-31.5m or customized |
| Lifting Height | 16m or customized |
| Work class | A5 A6 or customized |
| Power | 3-Phase A.C. 50Hz 380V |
Mechanism
1.Steel Q235B and Q345B:
2.the girder is connected by high strength screws;
3.welding seams are tested by high strength screws;
4.Main girders are tested by X-ray and ultrasound;
5.epoxy zinc-rich primer, and the thickness of oil film is 140 μm;
6.Forged wheels ,hardened gears and reliable disc brake;
7.Compact reducer motor drive, stepless control;
8.Compact structure, small volume an light weight trolley;
9.Good operation performance,stepless speed regulating and running smoothly.
Electric System:
1.Reasonable components installation ,convenient for check and maintenance;
2.electric cable is suspended in cable saddle, stationary cable trolley which slides on a galvanized C-type steel;
3.Power supply throngh stepless slide lines;
4.Lifting mechanisms and traveling mechanisms are mutually independent and could travel at the same time
5.Control panel protection degree is IP54;
Safety Protection Devices: Overload limiter, limit switch (lifting and traveling ),inerlocking protection devices, buffer, track sweep platel shield,bus bar protection board, anti-collision device,main disconnection switch,emergency stop system and moter load protection.
Company Information:
Established in year2013, Our company is a professional manufacturer and exporter that is concerned with the design, development and production.We are located in Hefei city which is very close to Shanghai and it is convenient for transportation. All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.
We have over 50 employees, an annual sales figure that exceeds USD 2 million and are currently exporting 70% of our production worldwide. Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customer satisfaction.
As a result of our high quality products and outstanding customer service, we have gained a global sales network reaching Mid-East Country, South-America, India and south East Asia. If you arc interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.
Shipping & Payment Terms:
Packing/Delivery Adevices:
| 1 | Crane Beam & Main Equipment: Packaged by color strip woven plastic cloth for abrasion reduce and | |||||||
| moisture-proof. | ||||||||
| 2 | Crane Kit & Electric Accessories: Export standard high quality plywood case for reduce distortion. | |||||||
| 3 | Loading & Delivery Option: Prefered to choose container loading for better cost saving. Oversize beams | |||||||
| and equipment can be cut for cantainer loading as suitable size crane products. Bulk cargo shipment will be | ||||||||
| used when container loading not available. | ||||||||
| 4 | Loading Port: Shanghai Port is prefered, Nanjing Port, Qingdao Port etc. available on your demand. | |||||||
| 5 | Delivery Time: Lead time 25 days, port time 5 days, estimate time of arraival (ETA) to Xxxxxx Port 30 days. | |||||||
Contact Information:
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}